IATA Dangerous Goods Regulations 52nd Edition (English) ADDENDUM

航空发表于 2011-6-19 11:56:58

**** Hidden Message *****

航空发表于 2011-6-19 11:57:27

IATA Dangerous Goods Regulations    52nd Edition (English) Effective 1 January 2011    ADDENDUM  Posted 30 December 2010   Users of the IATA Dangerous Goods Regulations are asked to note the following amendments and corrections to the 52nd Edition, effective from 1 January 2011.  Where appropriate, changes or amendments to existing text have been highlighted (in yellow - PDF or grey - hardcopy) to help identify the change or amendment. New or Amended State Variations (Section 2.8.2) Amend SAG (Saudi Arabia) Amend SAG-03  SAG-03 Name, address and telephone number of consignee must be written in full on the Air Waybill as well as the package of for dangerous goods to any destination in Saudi Arabia. Add New SAG-06 SAG-06 Name, address, and telephone number of consignee must be written in full on each package of dangerous goods shipments to any destination in Saudi Arabia. New or Amended Operator Variations (Section 2.8.4) Amend 9S (Southern Airlines) 9S-01 Class 7, Radioactive Materials will not be accepted for carriage outside the USA (see 10.10.2). Not used. Amend AA (American Airlines) Add new AA-06 Division 6.2 Category A, infectious substance affecting animals (UN 2900) and humans (UN 2814) will not be accepted for carriage (see PI 620).  New AB (Air Berlin) AB-01 Class 7, Radioactive material, fissile material and excepted packages will Not be accepted on AB Flights (see 10.5.8, 10.5.13) AB-02 Packages allowed on Cargo Aircraft Only or prepared according to packing instructions for Cargo Aircraft Only (CAO) are not allowed on AB Flights.  Amend MS (Egyptair) MS-01 The transport of dangerous goods on board EGYPTAIR NETWORK must comply with the following:  1.  The name, address and telephone number of the shipper/consignee must be written in full on the air waybill and on the package(s).  2.  The shipper of any dangerous goods must provide a written undertaking to re-ship the consignment at the shipper's cost and risk if the consignment is not cleared, or fully received by the consignee, within fifteen (15) working days from the arrival of the consignment.  Amend OU (Croatia Airlines) OU-04 Dangerous goods in Limited Quantities (“Y” packing instructions) will not be accepted for carriage, except for Consumer commodity (ID 8000) (see Subsection 2.7 and all “Y” Packing Instructions). OU-16 Biological substances, Category B UN 3373 (human or animal) will only be accepted if assigned to UN 2814 or UN 2900 as appropriate from approved Croatia Airlines customers. For additional information contact Croatia Airlines Cargo Sales Department.  The only exceptions to this variation are: . any tissues or organs intended for use in human or animal transplantation;  . pathogen-free blood or blood components collected for transfusion or for the preparation of blood products to be used for human or animal transfusion or transplantation.  In these cases, the air waybill must bear a detailed description to enable identification as non regulated material (see Packing Instruction 620 and 8.2). Amend QT (TAMPA Cargo) QT-01 Dangerous goods in excepted quantities will not be accepted for carriage (see Subsection 2.6) Not used. Amend SV (Saudi Arabian Airlines) SV-10 Not used. Battery-powered wheelchairs or mobility-aids with spillable batteries will not be accepted on SVA aircraft as checked baggage (see 2.3.2.3 and 9.3.16). Add new SV-13 The shipper must provide a 24-hour emergency telephone number of a person / agency who is knowledgeable of the hazards, characteristics and actions to be taken in the case of an accident or incident concerning each of the dangerous goods being transported. This telephone number, including the country and area code, preceded by the words "Emergency Contact" or "24-hour number", must be inserted on the DGD, preferably in the "Handling Information" box, e.g. Emergency Contact +47 67 50 00 00 (see 8.1.6.1 1 and 10.8.3.1 1). A 24-hour emergency telephone number is not required for shipments that do not require a Shipper’s Declaration for Dangerous Goods. Section 2 Page 30 – Amend 2.7.2.1(g) as shown: (g) Class 9: Only Dibromodifluoromethane (UN 1941), Benzaldehyde (UN 1990), Ammonium nitrate fertilizers (UN 2071), Environmentally hazardous substance, solid, n.o.s. (UN 3077), Environmentally hazardous substance, liquid, n.o.s. (UN 3082), Chemical kit or First aid kit (UN 3316), Aviation regulated liquid, n.o.s. (UN 3334), Aviation regulated solid, n.o.s. (UN 3335) of Class 9 substances.  Page 31 – Amend 2.7.2.2(j) as shown: (j) Class 9: Miscellaneous dangerous goods except Dibromodifluoromethane (UN 1941), Benzaldehyde (UN 1990), Ammonium nitrate fertilizers (UN 2071), Environmentally hazardous substance, solid, n.o.s. (UN 3077), Environmentally hazardous substance, liquid, n.o.s. (UN 3082), Chemical kit or First aid kit (UN 3316), Aviation regulated liquid, n.o.s. (UN 3334), Aviation regulated solid, n.o.s. (UN 3335). Section 3 Page 132 – Amend 3.9.2.4 as shown: 3.9.2.4 Environmentally Hazardous Substances  Environmentally Hazardous substances (aquatic environment) are those that meet the criteria in 2.9.3 of the 15th revised edition of the UN Model Regulations or that meet criteria in national or international regulations established by the appropriate national authority in the State of origin, transit or destination. The detailed classification categories and criteria for environmentally hazardous substances (aquatic environment) as set out in 2.9.3 of the 15th revised edition of the UN Model Regulations can be found at http://www.iata.org/whatwedo/cargo/dangerous_goods/index.htm  Substances or mixtures dangerous to the aquatic environment not presenting a danger covered by other classes, must be assigned to packing group III and designated:  . UN 3077 Environmentally hazardous substance, solid, n.o.s.; or  . UN 3082 Environmentally hazardous substance, liquid, n.o.s. Section 4 Table 4.2: Revise the entries as shown: UN/ ID no.     Proper Shipping Name/Description   Class  or  Div. (Sub Risk)     Hazard Label(s)     PG  EQ see  2.7  Passenger and Cargo Aircraft  Cargo Aircraft Only     S.P. see 4.4     ERG Code   Ltd Qty   Pkg Inst   Max Net Qty/Pkg   Pkg Inst   Max Net Qty/Pkg   Pkg Inst  Max Net Qty/Pkg   A  B  C  D  E  F  G  H  I  J  K  L  M  N   2071  Ammonium nitrate fertilizers  9  Miscellaneous  III  E1  Y958  30 kg G  958  200 kg  958  200 kg  A89 A90  9L   1549  Antimony compound, inorganic, solid, n.o.s. .  6.1  Toxic  III  E1  Y645  10 kg  670  100 kg  667 677  200 kg  A12  6L   3334  Aviation regulated liquid, n.o.s. . .  9  Miscellaneous  III  E1  Y964  30 kg G  964  100 L  964  220 L  A27  9A   3335  Aviation regulated solid, n.o.s. . .  9  Miscellaneous  III  E1  Y956  30 kg G  956  100 kg  956  200 kg  A27  9A                                 3054  Cyclohexyl mercaptan  3  Flamm. liquid  III  E1  Y344  10 L  355  60 L  365 366  220 L    3L   1597  Dinitrobenzenes, liquid  6.1  Toxic  II III  E4 E1  Y641 Y642  1 L 2 L  654 655  5 L 60 L  662 663  60 L 200 L 220 L  A3  6L 6L   3450  Diphenylchloroarsine, solid  6.1  Toxic  I  E0  Forbidden  Forbidden  673  15 kg 50 kg    6L   3245  Genetically modified micro-organisms  9  Miscellaneous    E0  Forbidden  959  No Limit  959  No Limit  A47  9L   3245  Genetically modified organisms  9  Miscellaneous    E0  Forbidden  959  No Limit  959  No Limit  A47  9L   2481  Ethyl isocyanate  6.1 (3)        Forbidden  Forbidden  Forbidden  A174  3P 6F   2483  Isopropyl isocyanate  6.1 (3)        Forbidden  Forbidden  Forbidden  A174  6F 6H   3249  Medicine, solid, toxic, n.o.s.   6.1    II III  E4 E1  Y644 Y645  1 kg 5 kg 10 kg  669 670  25 kg 100 kg  676 677  100 kg 200 kg  A3 A801  6L 6L   3208  Metallic substance, water-reactive, n.o.s. .  4.3  Dang. when wet  I  E0  Forbidden  Forbidden  487  15 kg  A3  4W   II III  E2 E1  Y475 Y476 Y477  5 kg 10 kg  483 485  15 kg 25 kg  489 491  50 kg 100 kg    4W 4W   3290  Toxic solid, corrosive, inorganic,  n.o.s. .  6.1 (8)  Toxic & Corrosive  I  E5  Forbidden  665  1 kg  672  25 kg 15 kg  A5  6C   II  E4  Y644  1 kg  668  15 kg  675  50 kg    6C   2928  Toxic solid, corrosive, organic, n.o.s. .  6.1 (8)  Toxic & Corrosive  I  E5  Forbidden  665  1 kg  672  25 kg 15 kg  A5  6C   II  E4  Y644  1 kg  668  15 kg  675  50 kg    6C      
  Section 5 Page 384 – Revise packing instruction 202 as shown: (i) Open cryogenic receptacles must bear the following marks permanently affixed e.g. by stamping, engraving or etching: . the manufacturer’s name and address; 
. the model number or name; 
. the serial or batch number; 
. the UN number and proper shipping name of gases for which the receptacle is intended; 
. the capacity of the receptacle in litres. 
 Note: The marking on open cryogenic receptacles will become mandatory with effect 1 January 2012 for open cryogenic receptacles manufactured after 1 January 2012. The size of the marking must be as set out for cylinders in 6.4.2.7.1. Open cryogenic receptacles manufactured prior to 1 January 2012 are not required to be so marked. (j) Open cryogenic receptacles are permitted for argon, krypton, neon, nitrogen and xenon refrigerated liquids. Page 412 – Revise Packing Instruction 377 as shown: OUTER PACKAGINGS Type  Drums  Boxes   Desc.  Steel  Plywood  Fibre  Plastic  Steel  Wood  Plywood  Recon-stituted wood  Fibreboard  Plastic   Spec  1A2  1D  1G  1H2  4A  4C1 4C2  4D  4F  4F 4G  4H1 4H2  
Page 422 – Revise Packing instruction 454 as shown: Additional Packing Requirements . each reel must be placed in a tightly closed metal or strong cardboard or fibreboard inner packaging with a cover held in place by adhesive tape or paper; 
. packagings must meet Packing Group II performance standards;  
. fibre drums (1G) may only contain 600 m of film.  
 Single packagings are not permitted. Page 449 – Revise Packing Instruction 492 as shown: COMBINATION PACKAGINGS UN Number    Total quantity per package passenger aircraft  Total quantity per package Cargo Aircraft Only   UN 3292, Batteries, containing sodium  Batteries may be offered for transport and transported unpacked or in protective enclosures such as fully enclosed or wooden slatted crates that are not subject to the requirements of Section 6  Forbidden  No limit   UN 3292, Cells, containing sodium    25 kg G  25 kg No limit  
  Page 468 – Revise Packing Instruction 565 as shown: Additional Packing Requirements  Oxygen generator, chemical containing oxidizing substances, including when fitted in associated equipment e.g. passenger service units (PSUs), protective breathing equipment (PBE) etc, must meet all the following conditions:  (a)  the generator, without its packaging, must be capable of withstanding a 1.8 m (6 ft) drop test onto a rigid, non-resilient, flat and horizontal surface in the position most likely to cause actuation without loss of its contents and without actuation. For PBE, which are in a vacuum-sealed bag as part of their containment system, this test may be conducted on the PBE in the vacuum-sealed bag;  (b)  when a generator is equipped with an actuating device it must have at least two positive means of preventing unintentional actuation For PBE, which are in a vacuum-sealed bag as part of their containment system, the vacuum-sealed bag may be considered the second positive means of preventing unintentional actuation. For oxygen generators, indicative methods of preventing unintentional activation are as follows:  1. mechanically actuated devices:  (i) two pins, installed so that each is independently capable of preventing the actuator from striking the primer;  (ii) one pin and one retaining ring, each installed so that each is independently capable of preventing the actuator from striking the primer; or  (iii) a cover securely installed over the primer and a pin installed so as to prevent the actuator from striking the primer and cover.  2. electrically actuated devices: The electrical leads must be mechanically shorted and the mechanical short must be shielded in metal foil.  3. For PBE: (i) a pin so as to prevent the actuator from striking the primer; and (ii) placed in protective packaging such as a vacuum-sealed bag. (c) the generator(s) must be transported in a package which will meet the following requirements when one generator in the package is actuated:  1. other generators in the package will not be actuated,  2. packaging material will not ignite, and  3. the outside surface temperature of the completed package will not exceed 100°C (212°F); Note: To enable test (c) (1), (2) and (3) to be conducted on PBE, it is acceptable to break the vacuum-sealed bag to actuate the generator before placing in the package. Page 497 – Revise Packing Instruction 681 as shown OUTER PACKAGINGS Type  Drums  Boxes   Desc.  Steel  Plywood  Fibre  Plastic  Steel  Wood  Plywood  Recon-stituted wood  Fibreboard  Plastic   Spec  1A2  1D  1G  1H2  4A  4C1 4C2  4D  4F  4F 4G  4H1 4H2  
  Page 518 – Revise Packing Instruction 876 as shown OUTER PACKAGINGS Type  Drums  Boxes   Desc.  Steel  Plywood  Fibre  Plastic  Steel  Wood  Plywood  Recon-stituted wood  Fibreboard  Plastic   Spec  1A2  1D  1G  1H2  4A  4C1 4C2  4D  4F  4F 4G  4H1 4H2  
Page 519 – PI 950, Revise Note to read: Note:  Replacements for the dangerous goods permitted in paragraphs (b) and (c) (c) and (d) must not be carried under this packing instruction. Page 524 – PI 956 Insert FX-06 Page 534 – PI 964 Insert FX-06 Page 535 – PI 964 revise as shown:  COMBINATION PACKAGINGS Inner Packaging (see 6.1)  Net quantity per inner packaging   Glass  10.0 L   Metal  30.0 L 40.0 L   Plastic  40.0 L 30.0 L  
  Page 535 – PI Y964 Insert FX-06 Page 537 – Revise Packing Instruction 965 as shown: Additional Requirements – Section I  . lithium ion cells and batteries must be placed in inner packagings that completely enclose the cell or battery then placed in an outer packaging. The completed package for the cells or batteries must meet the Packing Group II performance standards;  . lithium batteries with a mass of 12 kg or greater and having a strong, impact-resistant outer casing, or assemblies of such batteries, may be transported when packed in strong outer packagings in or protective enclosures. The packagings need not meet the requirements of Section 6 of these Regulations. The packagings must be approved by the appropriate authority of the State of origin. A copy of the document of approval must accompany the consignment;  . batteries manufactured after 31 December 2011 must be marked with the Watt-hour rating on the outside case. Page 542 – Revise Packing Instruction 968 as shown: Additional Requirements – Section I  . lithium metal cells and batteries must be placed in inner packagings that completely enclose the cell or battery then placed in an outer packaging. The completed package for the cells or batteries must meet the Packing Group II performance standards;  . lithium batteries with a mass of 12 kg or greater and having a strong, impact-resistant outer casing, or assemblies of such batteries, may be transported when packed in strong outer packagings in or protective enclosures. The packagings need not meet the requirements of Section 6 of these Regulations. The packagings must be approved by the appropriate national authority of the State of origin. A copy of the document of approval must accompany the consignment. Section 7 Page 595 Revise Figure 7.1.A as shown: FIGURE 7.1.A Limited Quantities Mark (7.1.5.3)  
Name: Limited Quantity  Minimum dimensions: 100 mm × 100 mm  For small packages the dimensions may be reduced to not less than 50 mm x 50 mm provided the marking remains clearly visible  Minimum width of line forming the diamond: 2 mm The symbol “Y” must be placed in the centre of the mark and must be clearly visible  Top and bottom portions and line must be black, centre area white or suitable contrasting background. Section 8 Page 620 – 8.1.5 Insert FX-18 Page 632 – In Figure 8.1.I and Figure 8.1.J delete “III” from packing group column for UN 1845, Dry ice Section 9 Page 644 – Revise 9.3.2.2.5 as shown: 9.3.2.2.5 Explosives of Division 1.4B must not be loaded with other explosives except for Division 1.4S. When loaded on the same aircraft with explosives other than Division 1.4S, Division 1.4B explosives must be loaded into separate unit load devices and when stowed aboard the aircraft, the unit load devices must be separated by other cargo with a minimum separation distance of 2 m. When not loaded in a unit load device Division 1.4B and other explosives must be loaded into different, non-adjacent loading positions and separated by other cargo with a minimum separation distance of 2 m. Section 10 Page 721 – In Figure 10.8.E delete “III” from packing group column for UN 1845, Carbon dioxide, solid Appendix A Page 732 – Revise definition of Cargo as shown: CARGO For the purposes of these Regulations, any property carried on an aircraft other than mail stores and accompanied or mishandled baggage. Appendix D.1 Page 770 – Replace the contact details for Canada with the following: Chief, Airspace Standards and Procedures   Transport Canada Civil Aviation Directorate Ottawa, Ontario Canada K1A 0N8 Tel: +1 (613) 998-9855 Fax: +1 (613) 954-1602 E-mail: ron.carter@tc.gc.ca    Page 772 – Replace the contact details for Finland with the following: Finnish Transport Safety Agency Aviation (Finnish CAA) P.O.Box 320 FI-00101 Helsinki FINLAND Tel: +358 (0)20 618 6050 Fax: +358 (0)20 618 500 E-mail: lentotoiminta@trafi.fi website: www.trafi.fi or www.civilaviationauthority.fi

eddy669 发表于 2011-8-13 23:19:43

Thanks a lot! :lol

jeffrey188 发表于 2011-8-19 15:51:35

tks.............

Chocolate 发表于 2014-5-25 21:34:46

谢谢，，，，，，，，，，，，，，，，，，，

chnliuwei 发表于 2014-10-27 22:26:21

very nice， tks！

页: [1]

航空论坛_航空翻译_民航英语翻译_飞行翻译's Archiver

IATA Dangerous Goods Regulations 52nd Edition (English) ADDENDUM