航空 发表于 2011-8-26 00:50:37

CFM56-7B LINE MAINTENANCE COURSE EVALUATION

<P>CFM56-7B LINE MAINTENANCE COURSE EVALUATION</P>
<P>**** Hidden Message *****</P>

航空 发表于 2011-8-26 00:51:18

CFMI PROPRIETARY INFORMATION<BR>Page 1<BR>May 2000<BR>EFFECTIVITY 737-600/700/800/900/COMBI/BBJ/C40A<BR>CFM56-7B SAC<BR>cfm<BR>The Power<BR>Of Flight<BR>CFM56-7B LINE MAINTENANCE COURSE EVALUATION<BR>Name:<BR>Test #3 May 2000 Date:<BR>Class Number:<BR>Correct Answers:<BR>Directions: For each of the following questions, circle the letter that is the most correct answer.<BR>1. Inside the fuel assembly there are ____ pump(s) and _____ shaft(s). (3.D.c)<BR>A. __3__ pumps and ___2__ shafts<BR>B. __1__ pumps and ___1__ shafts<BR>C. __2__ pumps and ___2__ shafts<BR>D. __2__ pumps and ___3__ shafts<BR>2. The IDG fuel to oil cooler or heat exchanger, is in series with the ___________ to cool the IDG oil. (3.D.c)<BR>A. IDG servo fuel heater found in ATA chapter 72-00-00,<BR>B. IDG air/fuel cooler found in ATA chapter 71-00-00,<BR>C. IDG fuel/oil cooler found in ATA chapter 73-00-00,<BR>D. IDG air/oil cooler found in ATA chapter 24-00-00,<BR>3. The EEC controls the Burner staging valve by: (3.D.c)<BR>A. an EHSV in the HMU sending an electrical signal to open or close the BSV.<BR>B. an EHSV in the HMU sending an servo signal to open or close the BSV.<BR>C. a solenoid in the HMU sending a servo signal to open or close the BSV.<BR>D. a solenoid in the HMU sending an electrical signal to open or close the BSV.<BR>4. The operation of the servo fuel heater is to. (2.C.b)<BR>A. To prevent hot oil temperatures in the IDG cooling system.<BR>B. To help cool the engine fuel into the fuel nozzles.<BR>C. To direct oil, fuel, hydraulic fluid, water and vapor overboard.<BR>D. To prevent ice in the servo systems.<BR>5. The fuel nozzle shrouds on the fuel manifold___ (3.D.c)<BR>A. To prevent oil contact with hot engine areas by enclosing and sealing of the fuel nozzle B-nut connection .<BR>B. To prevent fuel contact with hot engine areas by enclosing and sealing of the fuel nozzle B-nut connection .<BR>C. allows a leaking fuel nozzle B-nut connection to drain overboard through a drain line.<BR>D. To prevent fuel contact with fan areas of the fuel nozzle B-nut connection .

qwert123 发表于 2014-1-15 00:17:48

有附件吗                                          

f214216709 发表于 2014-9-4 14:53:43

还带题库的呀

海青岛主 发表于 2014-9-21 23:09:22

看看是什么好东西

titanium 发表于 2016-4-16 13:55:30

快快快快快

bei1999 发表于 2016-5-3 06:38:27

MAINTENANCE MANUAL
页: [1]
查看完整版本: CFM56-7B LINE MAINTENANCE COURSE EVALUATION