Screw-in Bonnet • Non-Rising Stem • Solid Wedge
125 PSI/8.6 Bar饱和蒸汽高达178oC
200 PSI/13.8 Bar非冲击性冷工作压力
125 PSI/8.6 Bar Saturated Steam to 353oF/178oC
200 PSI/13.8 Bar Non-Shock Cold Working Pressure
符合MSS SP-80标准
CONFORMS TO MSS SP-80
| 材料清单 MATERIAL LIST |
| 部件 PART | 规格说明 SPECIFICATION | |
| 1. | 手柄螺母 Handle Nut | 300系列不锈钢 300 Series Stainless Steel |
| 2. | 标志牌 Identification Plate | 铝 Aluminum |
| 3. | 手轮 Handwheel | 可锻铸铁ASTM A 47 Malleable Iron ASTM A 47 |
| 4. | 阀杆 Stem | 硅青铜ASTM B 371合金C69400/C69430 Silicon Bronze ASTM B 371 Alloy C69400/C69430 |
| 5. | 填料螺母 Packing Nut | 烧结青铜ASTM B 438 70 等级I类型II或黄铜ASTM B 16 Sintered Bronze ASTM B 438 70 Grade I Type II or Brass ASTM B 16 |
| 6. | 填料压盖 Packing Gland | 烧结青铜ASTM B 438 70 等级I类型II或黄铜ASTM B 16 Sintered Bronze ASTM B 438 70 Grade I Type II or Brass ASTM B 16 |
| 7. | 填料 Packing | 含石墨的芳族聚酰胺 Aramid Fibers with Graphite |
| 8. | 填料箱 Stuffing Box | 青铜ASTM B 62 Bronze ASTM B 62 |
| 9. | 阀盖 Bonnet | 青铜ASTM B 62 Bronze ASTM B 62 |
| 10. | 阀体 Body | 青铜ASTM 62 Bronze ASTM B 62 |
| 11. | 楔形闸板 Wedge | 青铜ASTM 62 Bronze ASTM B 62 |
| *12. | 软管盖 Hose Cap | 青铜ASTM B 62 Bronze ASTM B 62 |
| 13. | 软管盖垫圈 Hose Cap Gasket | 橡胶 Rubber |
| 14. | 安全链条 Safety Chain | 黄铜 Brass |
| 注意：可提供不配置盖子和链条的阀门-请咨询工厂。 *DN15-DN25的阀门螺纹间距为每英寸111/2圈 DN32-DN40的阀门螺纹间距为每英寸9圈。 NOTE: Valve available less cap and chain – consult factory. * 1/2 – 1 is 111/2 threads per inch 11/4–11/2 is 9 threads per inch |
T-113-HC
螺纹 x ANFH连接
Threaded x ANFH
T-113-HC
NPT x ANFH
| 结冰气候预防 - 检测管线系统后，阀门应该处于开启状态，做到排泄完全充分。 Freezing Weather Precaution – Subsequent to testing a piping system, valves should be in an open position to allow complete drainage. ◆ 如果需要工作压力的详细资料，请参阅第109页的压力温度表。 ◆ For detailed Operating Pressure, refer to Pressure Temperature Chart on page 109. |