Screw-in Bonnet • Integral Seat • Renewable Seat and Disc
125 PSI/8.6 Bar饱和蒸汽高达178oC
200 PSI/13.8 Bar非冲击性冷工作压力
125 PSI/8.6 Bar Saturated Steam to 353oF/178oC
200 PSI/13.8 Bar Non-Shock Cold Working Pressure
符合MSS SP-80标准
CONFORMS TO MSS SP-80
| 材料清单 MATERIAL LIST |
| 部件 PART | 规格说明 SPECIFICATION | |
| 1. | 手柄螺母 Handle Nut | 300系列不锈钢 300 Series Stainless Steel |
| 2. | 标志牌 Identification Plate | 铝 Aluminum |
| 3. | 手轮 Handwheel | 可锻铸铁ASTM A 47 Malleable Iron ASTM A 47 |
| 4. | 阀杆 Stem | 硅青铜ASTM B 371合金C69400/C69430 Silicon Bronze ASTM B 371 Alloy C69400/C69430 |
| 5. | 填料压盖 Packing Gland | 青铜ASTM B 62或ASTM B 584 合金C84400或黄铜ASTM B 16 Bronze ASTM B 62 or ASTM B 584 Alloy C84400 or Brass ASTM B 16 |
| 6. | 填料螺母 Packing Nut | 青铜ASTM B 62或ASTM B 584 合金C84400或黄铜ASTM B 16 Bronze ASTM B 62 or ASTM B 584 Alloy C84400 or Brass ASTM B 16 |
| 7. | 填料 Packing | 含石墨的芳族聚酰胺 Aramid Fibers with Graphite |
| 8. | 阀盖 Bonnet | 青铜ASTM B 62 Bronze ASTM B 62 |
| *9. | 阀瓣固定装置螺母 Disc Holder Nut | 青铜ASTM B 62或B 140合金C31400 Bronze ASTM B 62 or B 140 Alloy C31400 |
| 10. | 阀瓣固定装置 Disc Holder | 青铜ASTM B 62 Bronze ASTM B 62 |
| 11. | 阀座阀瓣 Seat Disc | 蒸汽 (TFE) (Y) Steam (TFE) (Y) |
| 12. | 阀座阀瓣螺母 Seat Disc Nut | 青铜ASTM B 62配置不锈钢垫圈 Bronze ASTM B 62 w/SS Washer |
| 13. | 阀体 Body | 青铜ASTM B 62 Bronze ASTM B 62 |
| * 通径DN65和DN80采用ASTM B 61 * 21/2" and 3" are ASTM B 61 |
 T-311-Y 螺纹连接 Threaded |  S-311-Y 焊接连接 Solder |
T-311-Y
NPT x NPT
S-311-Y
C x C
| 结冰气候预防 - 检测管线系统后，阀门应该处于开启状态，做到排泄完全充分。 Freezing Weather Precaution – Subsequent to testing a piping system, valves should be in an open position to allow complete drainage. ◆ 如果需要工作压力的详细资料，请参阅第109页的压力温度表。 ◆ For detailed Operating Pressure, refer to Pressure Temperature Chart on page 109. |