Horizontal Swing • Regrinding Type •
Renewable Seat and Disc • Y-Pattern
200 PSI/13.8 Bar饱和蒸汽高达201oC
400 PSI/27.6 Bar非冲击性冷工作压力
200 PSI/13.8 Bar Saturated Steam to 391oF/201oC
400 PSI/27.6 Bar Non-Shock Cold Working Pressure
符合MSS SP-80标准
CONFORMS TO MSS SP-80
| 材料清单 MATERIAL LIST |
| 部件 PART | 规格说明 SPECIFICATION | |
| 1. | 阀盖 Bonnet | 青铜ASTM B 61 Bronze ASTM B 61 |
| 2. | 阀体 Body | 青铜ASTM B 61 Bronze ASTM B 61 |
| 3. | 铰链销 Hinge Pin | 青铜ASTM B 140合金C31400或 B 134合金C23000 Bronze ASTM B 140 Alloy C31400 or B 134 Alloy C23000 |
| 4. | 阀瓣悬挂架 Disc Hanger | 青铜ASTM B 61或 304不锈钢DN6至DN30. Bronze ASTM B 61 or 304 Stainless Steel 1/4" thru 3/4" sizes |
| 5. | 阀座阀瓣 Seat Disc | 青铜ASTM B 61 Bronze ASTM B 61 |
| 6. | 悬挂架螺母 Hanger Nut | 青铜ASTM B 16 Bronze ASTM B 16 |
| 7. | 铰链销塞 Hinge Pin Plug | ASTM B 140合金C31600(图中没有显示) ASTM B 140 Alloy C31600 (not shown) |
T-453-B
螺纹连接
Threaded
T-453-B
NPT x NPT
| 美国尼伯科止回阀可以安装在水平管线和流向朝上的垂直管线的任何位置上。在角度不大于15o的倾斜管线上也能够令人满意的工作。 NIBCO check valves may be installed in both horizontal and vertical lines with upward flow or in any intermediate position. They will operate satisfactorily in a declining plane (no more than 15o). 警告：不要用在往复式空气压缩机管线上。 Warning – Do Not Use For Reciprocating Air Compressor Service. ◆ 如果需要工作压力的详细资料，请参阅第109页的压力温度表。 ◆ For detailed Operating Pressure, refer to Pressure Temperature Chart on page 109. |