| 0747-0940SITCQ106
& ]* K" M4 P% \热氧化安定性测定仪 1套
, {" [* l2 V/ d/ AThermal oxidation stability tester One set
; `5 w, E8 S" U1.主要招标内容：" P! m0 ^: ^ |# D+ s; R
设备用途及基本要求：主要用于测定涡轮燃料在高温氧化条件下燃料沉积分解物
+ { W, U v8 P: z6 m所产生的趋势，可执行符合中国国家标准以及ASTM D3241，IP323， ISO 6249相关标
; m" S0 |: f8 X( Q. `6 @3 W& O准的检测。, A6 R7 E7 y, Z- ~2 w; e( ^
The equipment is mainly used for the measurement of the trend generated by the fuel
8 U( z, j7 s/ Vsediment and decomposed products of turbine fuel in high temperature oxidationconditions,
( S2 z* i2 G% b' N4 K# h0 pable to execute the test compliant with China's national standards and the relevant standards( P9 K7 J$ \! y g( Y
in ASTM D3241, IP323 # @ {) G5 {* Y
and ISO 6249. 2.主要技术参数：
! }, P! q1 }3 r4 A/ j. O8 G% Y. \①燃料样品流速范围：0.001~9.999毫升/分钟。) K& K5 @# a7 ]9 S8 X/ y
燃料样品流速精确率：±2%或更优。$ u- P6 f2 B! B$ i/ X. `/ I9 h
热电偶温度范围：0℃至+500℃。热电偶类型：K（铬镍合金/铝镍合金）/ b9 I# d; S0 E" s# k6 h& v" B
压差（DP）范围：0至+280 mmHg。
) w/ A% f# t' l, _6 B. t操作系统压力范围：3.45 MPa（500psig）± 10%7 ?3 d1 V& l" o4 [) [8 l; ~
②通风流速：1.5升/分钟左右绿色标记范围内。
1 T# k5 ~0 N8 @冷却剂流速：10加仑（英制）/小时左右，调整在绿色流体范围内。
0 e& j8 n- e1 N4 w G① The velocity range of fuel samples: 0.001 ~ 9.999 ml/min.
0 Y7 S) S' x* jThe velocity accuracy of fuel sample: ± 2% or better." C$ }6 b2 x' X+ _
The range of thermocouple temperature: 0 °C ~ +500°C. Thermocouple type: K 1 ~4 d5 M0 I6 m8 l: Z" s) f
(chrome nickel alloy / aluminum nickel alloy)) D$ Y7 l7 F+ o
(DP) Differential pressure range: 0 ~ +280 mmHg.
. r' G; H+ A0 Q( X' {( P: e# uThe pressure range of operating system: 3.45 MPa (500psig) ± 10%
/ P: w) z! \: Z2 `. @② Ventilation flow rate: Around 1.5 litres / minute in the scope of green mark. Coolant flow rate: Around 10 gallons (British system) / hour in the scope of green fluid |