AVIATION MECHANIC AIRFRAME Practical Test Standards

航空

AVIATION MECHANIC AIRFRAME

Practical Test Standards

游客，如果您要查看本帖隐藏内容请回复

航空

AVIATION MECHANIC AIRFRAME

Practical Test Standards

June 2003

FLIGHT STANDARDS SERVICE

Washington, DC 20591

AVIATION MECHANIC AIRFRAME

PRACTICAL TEST STANDARDS

2003

FLIGHT STANDARDS SERVICE

Washington, D.C. 20591

NOTE

FAA-S-8081-27, Aviation Mechanic Airframe Practical Test Standards (PTS) is to replace the oral and practical test guides currently used. Both testing procedures will be in effect until all examiners have been trained to administer the test in accordance with the PTS, or 2 years after the effective date of Order 8610.4J, Aviation Mechanic Examiner Handbook. After which time, all tests must be administered under the PTS guidelines. New examiners must use the PTS upon completion of initial training. Previously appointed examiners must transition to the PTS within 60 days after completion of recurrent training.

Record of Changes

Change 1: 8/8/2003

Introduction

Performance Levels

LEVEL 1—Z3b. Nondestructive changed to specified.

LEVEL 1—PERFORMANCE STANDARD deleted.

LEVEL 2—bullet 2: added additional text.

LEVEL 2—PERFORMANCE STANDARD deleted.

LEVEL 3—bullet 4: added additional text.

LEVEL 3—Z3e. Verify changed to check.

LEVEL 3—PERFORMANCE STANDARD deleted.

bocome

AVIATION MECHANIC AIRFRAME Practical Test Standards

linairm

楼主辛苦了，好东西