产品指南 - 球阀(5)Product Guide—Ball Valves (5)

帅哥

KynarTM (PVDF) Tru-Bloc球阀 True Union红和天然 KynarTM (PVDF) Tru-Bloc Ball Valves True Union Red and Natural 22oC温度下压力为150 psi，非冲击性水，全端口(全流道) 150 psi at 73oF water–non-shock–full port 红Kynar Red Kynar 　　不含任何颜料的PVDF，对于紫外线来说是透明的。所以PVDF是少数不会因为紫外线照射而退化的塑料材料之一，但是管道系统内的流体介质且直接暴露在阳光下，反而可能会影响其稳定性。因此，所有PVDF管道组件，包括Chemtrol用于通用化工领域的阀门产品，都含有经过美国食品及药物管理局(FDA)批准的红色颜料来屏蔽紫外线的照射。 　　PVDF, absent of any color pigment, is opaque to ultraviolet light. So while PVDF is one of the few plastic materials that is not degraded by UV radiation, exposure of the fluid medium inside a piping system to direct sunlight can frequently adversely affect its stability. Therefore, all PVDF piping components, including valves that Chemtrol produces for general chemical service, contain an FDA-approved red pigment to mask the penetration of UV rays. 天然Kynar Natural Kynar 　　PVDF类型I (聚合的乳胶)均聚物是一种著名的没有金属离子和外部有机化合物的材料。在18百万欧水中萃取出的离子只是十亿分之几。而且由于这种树脂不需要进行加工处理或者添加其它外部的添加剂来帮助机械加工或维持其长期稳定性，部件的硬抛光表面将会一直保持完好，所以管道系统将不会释放微粒进入流体介质中。而且，也不会存在容易导致生物生长环境的表面微孔。天然Kynar材料适用于超级高纯度的水和化工应用领域。 　　PVDF Type I (polymerized in emulsion) homopolymer is notably free of metallic ions and foreign organic compounds. Extractable ions by 18-megohm water are in the low parts-per-billion. And since the resin does not require processing or other external additives to aid manufacturing or longterm stability, the hard-polish surface of components will remain intact, so that piping systems will not release particulate to the fluid medium. Further, there will be no surface micropores to encourage biological growth. Natural Kynar systems are intended for ultra high pure water and chemical services. 特点 Features 这种阀门问世30多年来，其阀体长度和管套接连接件上的强力改进顶点螺纹始终没有改变。这使得人们可以用新的阀腔更换肮脏的阀门，新旧管接螺母能够互相配合，不需要改变管道长度。 The laying length of the body and the heavy-duty modified-acme threads in the union connections to the body have not changed in the 30-year history of the valve. This permits fouled valve replacement with a new body cartridge, which will fit the old union nuts. No change in piping length is required. 型号C结构特点，在于阀门两端的TFE阀座，确保阀座后侧周围没有泄漏。在Chemtrol Tru-Bloc关闭阀安装和测试后，连接到满储的储罐的管道开口将不会开始滴漏。 Model-C design features, under the TFE seats at both ends of the valve, ensure no leakage around the back-side of the seats. Open piping attached to a filled tank will not start to drip-leak following installation and test of a Chemtrol Tru-Bloc shut-off valve.

型号C结构，在阀座支架下配置增能器O形环，使得阀门能够根据阀座磨损状况自动进行调整。在工厂组装期间，阀座的封装挤压和阀门测试的调整都是通过机械设备进行操作。一旦安装完毕，手动旋紧的管接螺母就紧压着Chemtrol阀门的密封面。 Model-C design, with an energizer O-ring beneath the seat-carrier, enables the valve to automatically adjust for seat wear. Adjustments for envelope squeeze on seats and valve testing are done by machine during factory assembly. Upon installation, a hand-tightened union nut serves to compress the face-seal of a Chemtrol valve. 全端口(全流道)结构对流体的阻力最小，因此压降也最小。 Full port design produces minimum flow restriction with the lowest possible pressure-drop. 这些阀门都是在没有硅酮成分的环境下制造和组装的。 Valves are manufactured and assembled without exposure to silicone compounds. 特别的黑色手柄能够远距离表示“启闭”和流向。手柄上模铸的箭头表示旋转方向，方便操作人员在90o角度范围内进行操作。由于实际应用中可能需要拆卸手柄，因此D形环阀杆平面表示“启闭”，阀杆顶部的的模铸箭头表示流向。 Distinctive black handle indicates “open/close” and direction of flow at a distance. And molded-in arrows on top of the handle dictate rotational direction to personnel for easy operation within 90° stops. For applications requiring handle removal, the D-ring stem flats indicate “open/close” and a molded-in arrow on top of the stem indicates flow direction. 参阅Chemtrol阀门执行机构指南，选择电动或气动执行机构及附件，包括用于阀门现场安装或工厂组装的塑料外壳和塑料安装组件。 Refer to the Chemtrol Valve Actuation Guide for a full selection of electrical and pneumatic actuators with accessories, including plastic housings and plastic mounting kits for field or factory assembly to valves. 注意： Notes 　　参阅第2页的“部件材料清单”。如果需要了解更多的材料选择，请参阅第1页的“材料”。适用于球阀的“执行机构安装参数”和“备选附件”的完整清单请参阅第21页及以后的内容。这些阀门的“安装和维护指南”内容在第8页。如果需要额定压力-温度的特殊关系，请参阅第33页的“工程技术参数”。如果需要“Chemtrol阀门标准”，请参阅第35页。 　　See page 2 for a list of Components and Construction Materials. For more insight into the selection of materials, refer to Materials, page 1. Actuation Mounting Data and a complete listing of Optional Accessories for ball valves begins on page 21. Installation and Maintenance Instructions for these valves appear on page 8. For specific relationships of pressure vs. temperature ratings, refer to Engineering Data, page 33. For Chemtrol Valve Standards, see page 35.

Chemtrol型号 Chemtrol Figure Numbers

阀门通径 Valve Sizes	材料 Materials	弹性材料 阀内件 Elastomeric Trim	端口连接 End Connections
			承插 Soc.	螺纹 Thd.	法兰 Flgd.
DN15 - DN100 1/2”– 4” DN15 - DN100 1/2”– 4”	红PVDF1 Red PVDF1 天然PVDF1 Natural PVDF1	FPM (氟化橡胶) FPM (Viton) FPM (氟化橡胶) FPM (Viton)	S65TB-V S65TB-V S66TB-V S66TB-V	T65TB-V T65TB-V T66TB-V T66TB-V	F65TB-V F65TB-V F66TB-V F66TB-V

1 Kynar管道、连接件或阀门都没有DN32这种通径。 1 No Kynar pipe, fittings, or valves are offered in the 1 1/4” size.

尺寸-重量-流量系数 Dimensions–Weights–Flow Coefficients

	外形尺寸 Profile						端到端 End-to-End					流量系数 Fluid Flow Coefficient
阀门 通径 Valve Size	A1	B	C	D	N	P	E 螺纹 Thd.	F 承插 Soc.	G 承插 Soc.	H 法兰 Flgd.	大致2 重量(磅) Approx.2 Wt. Lbs.	Cv3 TU
1/2	1.70	1.94	1.95	0.50	2.98	3.41	4.19	4.19	2.49	6.04	0.47	22
3/4	2.12	2.50	2.36	0.75	3.63	3.77	5.00	5.00	3.05	7.32	0.84	55
1	2.12	2.69	2.75	1.00	4.13	4.15	5.50	5.50	3.30	8.06	1.15	112
1-1/4	2.56	3.74	3.98	1.50	4.98	4.86	6.76	6.76	4.06	9.92	2.59	285
1-1/2	2.56	3.74	3.98	1.50	4.98	4.86	6.76	6.76	4.06	9.92	2.59	285
2	2.92	4.25	5.13	2.00	5.78	5.82	8.01	8.01	5.06	11.41	5.30	540
3	4.00	5.59	6.99	2.90	7.42	7.31	10.39	10.39	6.70	14.87	12.58	1348
4	8.00	6.05	8.54	3.95	8.52	8.70	12.22	12.22	7.78	17.52	24.41	2602

手柄并不是关于中心线对称。表中的尺寸表示最大操作半径。但是对于DN100通径的阀门，其启闭程度必须从显示的位置上旋转180o . Handle is not symmetrical about the centerline. Dimension shown represents the longest operational radius, but the handle position must be rotated 180° from that shown for the 4" size. 显示的重量代表承插型号。 Weight shown represents the socket figure. Cv值是根据基本阀门的放置长度计算出来的(G)。 Cv values were computed for the basic valve laying lengths (G). 管道、连接件或阀门都没有DN32通径。 No pipe, fittings, or valves are offered in the 1 1/4" size.

不要将本样本中的测试数据用在压缩空气或其它气体上。如果需要关于专用于压缩空气和其它气体的抗龟裂热塑塑料管道系统请参阅Chemtrol Chem-Aire®产品样本。 Do not use or test the products in this catalog with compressed air or other gases. See Chemtrol Chem-Aire® literature for information about shatter-resistant thermoplastic piping systems specifically designed for compressed air and other gases.