320系列气象雷达

航空

游客，如果您要查看本帖隐藏内容请回复

航空

NAVIGATION MENU Wx Radar presentation 1/12
NAVIGATION MENU
Wx Radar presentation 2/12
A Weather Radar is installed to detect
severe weather and display it on the ND...
NAVIGATION MENU
Wx Radar presentation 3/12
ffoorr uussee aass aa sseevveerreeweeaatthheerr aavvooiiddaannccee ttooooll..
NAVIGATION MENU Wx Radar presentation 4/12
The WX RADAR control panel is located on
the center pedestal..
NAVIGATION MENU Wx Radar presentation 5/12
NAVIGATION MENU Wx Radar presentation 6/12 NEXT
We will now look at the different controls and indications of
the weather radar :
- The ON/OFF switch controls its power supply,
when switched on, the TILT indication appears on the ND,
NAVIGATION MENU Wx Radar presentation 7/12
NAVIGATION MENU Wx Radar presentation 8/12 NEXT
- The TILT knob, which is used to adjust the radar antennae
relative to horizon. The tilt angle is displayed on the ND,
NAVIGATION MENU Wx Radar presentation 9/12
- The GAIN knob, which is used to adjust the sensitivity of
the receiver manually. In this case, the word MAN appears in
green under the TILT indication.
In the AUTO position, the radar adjusts the gain to the
optimum setting automatically.
NEXT
NAVIGATION MENU Wx Radar presentation 10/12
NAVIGATION MENU Wx Radar presentation 11/12
NAVIGATION MENU
Wx Radar presentation 12/12
- The mode selector with its 3 positions :
. WX shows the intensity of precipitation
. WX/TURB shows the turbulence areas in magenta
. MAP : the radar operates in ground mapping mode.
Waatteerr
Grroouunndd
Ciittiieess,,moouunnttaaiinnss
NEXT
MMoodduullee ccoommpplleetteedd
NAVIGATION MENU Wx Radar presentation 13/12
OONN//OOFFFFSSWWIITTCCHH
LLIISSTTOOFFSSUUBBJJEECCTTSS
EXIT
AUDIO GLOSSARY FCOM
RETURN
CCOONNTTRROOLLPPAANNEELL
GGEENNEERRAALL
GGAAIINNKKNNOOBB
TTIILLTTKKNNOOBB
MMOODDEEKKNNOOBB

979199501

2# 大 中 小 发表于 2011-4-10 10:33 只看该作者 POWER PLANT (IAE) MENU Manual Start 1/31 POWER PLANT (IAE) Manual Start 2/31 We will see now, how to manually start the engines. There are several reasons why a manual start may be required including low pneumatic pressure. The main difference between a manual and an automatic start is that the pilot controls the time at which fuel and ignition are supplied to the engine. The FADEC only provides passive monitoring of the engine during the start sequence. This means that responsibility for preventing an over limit start remains with the pilot. Note: Manual starts are completed using the procedure detailed in FCOM 3- procedures and techniques MENU POWER PLANT (IAE) Manual Start 3/31 The FADEC controls: - the closure of the start valve at 43 % N2 - and ignition cut off on the ground. MENU POWER PLANT (IAE) Manual Start 4/31 The configuration is the same. On the E/WD, all indications related to the engines are displayed in amber as long as the FADECs are not powered. In order to start the engines, the engine mode selector must be switched to IGN/START position first. Swiittcchh tthhee eennggiinneemooddee sseelleeccttoorr ttoo IIGN//STTARTT.. MENU POWER PLANT (IAE) MENU Manual Start 5/31 Noo,, sswiittcchh tthhee eennggiinneemooddee sseelleeccttoorr ttoo IIGN//STTARTT.. POWER PLANT (IAE) MENU Manual Start 6/31 TToo sswiittcchh tthhee eennggiinneemooddee sseelleeccttoorr ttoo IIGN//STTARTT.. POWER PLANT (IAE) MENU Manual Start 7/31 POWER PLANT (IAE) Manual Start 8/31 When the selector is in the IGN/START position: - the FADECs are energized and the engine parameters are displayed on the E/WD. -the ENGINE ECAM page is displayed automatically. MENU POWER PLANT (IAE) MENU Manual Start 9/31 POWER PLANT (IAE) Manual Start 10/31 We will start engine 2 using the APU BLEED. The ENG MAN START pb switches control their respective start valves. To start engine 2, raise the guard and select ENG MAN START 2 pb switch. Note: PF should start his chrono when he selects the ENG MAN START pb switch. Sttaarrtt eennggiinnee 22.. MENU POWER PLANT (IAE) MENU Manual Start 11/31 No, to start engine 2, click on the ENG MAN START 2 pb sw POWER PLANT (IAE) MENU Manual Start 12/31 No, to start engine 2, click on the ENG MAN START 2 pb sw POWER PLANT (IAE) MENU Manual Start 13/31 POWER PLANT (IAE) MENU Manual Start 14/31 POWER PLANT (IAE) Manual Start 15/31 On the ECAM ENGINE page the corresponding start valve opens. On the ENG start panel, ON illuminates blue on the MAN START 2 pb indicating that the start valve has opened. MENU POWER PLANT (IAE) Manual Start 16/31 Onn tthhee E//WD,, N22 iinnccrreeaasseess.. MENU POWER PLANT (IAE) Manual Start 17/31 Onn tthhee ECAMENGIINE ppaaggee tthhee ooiill pprreessssuurree iinnccrreeaasseess.. MENU POWER PLANT (IAE) Manual Start 18/31 N2 continues increasing to max motoring speed. 50 seconds after the ENG MAN START pb switch is pressed, select ENG 2 MASTER switch ON. Note: PNF should monitor to ensure EGT increase within 20 seconds of fuel flow starting. Swiittcchh oonn ENGMASTTER sswiittcchh 22.. MENU POWER PLANT (IAE) MENU Manual Start 19/31 No, to switch on ENG MASTER switch 2, click on ENG MASTER switch 2. POWER PLANT (IAE) MENU Manual Start 20/31 No, to switch on ENG MASTER switch 2, click on ENG MASTER switch 2. POWER PLANT (IAE) MENU Manual Start 21/31 POWER PLANT (IAE) MENU Manual Start 22/31 POWER PLANT (IAE) Manual Start 23/31 On the ECAM ENGINE page: - the fuel used is reset, - both igniters are on. On the E/WD fuel flow is indicated. MENU POWER PLANT (IAE) MENU Manual Start 24/31 On the ECAM ENGINE page both igniters are on and When N2 reaches 43%: - start valve closes, - and ignition stops. POWER PLANT (IAE) MENU Manual Start 25/31 N2 continues increasing. At about 58% it stabilizes and the grey background disappears indicating that the start sequence is finished. The ENGINE 2 is running and all its parameters are stabilized. POWER PLANT (IAE) Manual Start 26/31 Swiittcchh ooffff eennggiinnee 22maann ssttaarrtt ppuusshhbbuuttttoonn.. MENU POWER PLANT (IAE) MENU Manual Start 27/31 No, to switch off engine 2 man start pushbutton, push on pushbutton 2. POWER PLANT (IAE) MENU Manual Start 28/31 No, to switch off engine 2 man start pushbutton, push on pushbutton 2. POWER PLANT (IAE) MENU Manual Start 29/31 POWER PLANT (IAE) MENU Manual Start 30/31 POWER PLANT (IAE) MENU Manual Start 31/31 The manual start sequence is finished. If required engine 1 can be started in a similar manner. NEXT MMoodduulleeccoommpplleetteedd POWER PLANT (IAE) MENU Manual Start 32/31 LLIISSTTOOFFSSUUBBJJEECCTTSS

airportcn

good................

bocome

空客飞行员指南

tissle

好资料，学习中。。。

gordon525

谢谢辛苦了 收藏一下

wsinglejoke

666666666666666666666666666666

diguo

恩，好东西。好好学习一下