Skyflex aircraft sealant product guide

航空

游客，如果您要查看本帖隐藏内容请回复

航空

Skyflex®
aircraft sealant product guide
Skyflex®
aircraft sealant
table of contents
Summary ............................................................................. 3
Benefits ............................................................................. 3
Time Analysis.......................................................................... 4
Military Technical Order Approvals .......................................... 5
Commercial Approvals ............................................................ 6
Commonly Used Part Numbers ................................................ 8
GORE™ SKYFLEX® Sealant Tape ........................................... 11
Installation Techniques ............................................... 11
Typical Applications .................................................... 12
Data Sheet .................................................................. 13
GORE™ SKYFLEX® Environmental Gaskets ............................. 14
Typical Applications .................................................... 14
Data Sheet .................................................................. 15
GORE™ SKYFLEX® Fuel Sealant ............................................. 16
Typical Applications .................................................... 16
Data Sheet .................................................................. 17
2
summary
GORE™ SKYFLEX® Aircraft Sealant offers the lightest weight, non-curing,
non-hazardous form-in-place sealant technique. This product
can be installed and maintained more efficiently than all other
sealant methods. This revolutionary material provides excellent
protection against corrosion, water ingress, and other environmental
influences including fuels and oils.
GORE™ SKYFLEX® Sealant remains flexible and compliant over many
panel installation cycles, retaining all of the designed benefits and
features that are crucial to ensure the integrity of every application
today.
GORE™ SKYFLEX® Sealant is available in many forms, including
ribbed sealant tape, flat sealant tape, sheet, die cut gaskets, and
environmental and fuel resistant forms. For more information or
assistance in choosing the sealant right for your application contact
Gore.
benefits
• Non Hazardous/No hazardous waste disposal
• Resistant to corrosion
• Multiple panel removal/installation cycles possible
• Lightweight
• Protection against water ingress and other environmental influences
• No sealant cure time
• Easy to install
• Conforms to surface irregularities
• Temperature range: -240°C to +260°C
3
Skyflex®
aircraft sealant
time analysis
How much time are you spending sealing your panels?
A typical panel installation using traditional sealants takes up to 120
minutes each removal cycle, plus an additional cure time of 6 to 48
hours. The typical time estimate is derived using the following:
• Scraping off and cleaning old sealant=45 minutes
• Masking panel off=15 minutes
• Mixing polysulfide sealant=15 minutes
• Cleanup=15 minutes
A typical initial (first) panel installation using GORE™ SKYFLEX®
sealant takes up to 65 minutes for the first installation with no cure
time. Subsequent panel removal cycles requires no additional time
when using GORE™ SKYFLEX® sealant; no time is spent scraping
sealant, reapplying sealant, or waiting for the sealant to cure. The
typical time estimate is derived using the following:
• Scraping off and cleaning old sealant=45 minutes
• Installing GORE™ SKYFLEX® sealant=20 minutes
1st 2nd 3rd 4th 5th
600
500
400
300
200
100
0
Minutes
life cyle time savings
The sealant application per panel chart shows the cumulative time required to replace sealant for multiple panel removals.
By the fifth time the panel is removed and replaces using traditional sealants, the cumulative time required for this activity
is 600 minutes while the cumulative time for GORE™ SKYFLEX® Sealant is 65 minutes.
Panel Removals
Polysulfide
SKYFLEX Sealant
installation time analysis
gore™
traditional skyflex®
sealant sealant
Scraping off and
cleaning old sealant 45 min. 45 min.
Masking panel and 30 min. 0 min.
mixing polysulfide
sealant
Applying sealant 15 min. 20 min.
Cleanup 15 min. 0 min.
Cure time 6-48 hours 0 min.
4
aircraft technical order
Joint Services Tech. Manual NAVAIR 01-1A-509
T.O. 1-1-691
TM 1-1500-344-23
A-10 Thunderbolt 1A-10A-2-51JG-1
1A-10A-2-51MS-1
B-1B Lancer 1B-1B-23
B-52 Stratofortress 1B-52H-3
C-5 Galaxy 1C-5A-23
1C-5A-3
C-17 Globemaster III OEM Installation at factory
1C-17A-23
C-130 Hercules 1C-130A-23
1C-130B-2-2
1C-130H-2-2
1C-130(H)H-2-1
1C-130H-2-56JG-00-1
C-141 Starlifter 1C-141B-23
EA-6B Prowler 01-85ADC-3-3
ES-3A 01-S3AAA-3-4
E-2 Hawkeye 01-E2AAA-3-1.1
E-3 Sentry 1E-3A-2-28-1
NN1E3A-3-572
E-6 Tacamo 01-E6AAA-SRM-000
A1-E6AAB-SRM-200
Eurofighter OEM Specification
F-4 Phantom 1F-4-3-1-6
F-5 Tiger 1F-5E-3
F-15 Eagle 1F-15A-23
1F-15A/C/E-3-5
F-16 Falcon In process of approval by Lockheed Martin
H-53 A1-H53CE-110-000
A1-53AD-110-000
1H-53(M)J-2-1
KC-135 Stratotanker 1C-135(K)A-3-1
1C-135(K)A-3-4
PDM Work Specification
P-3 Orion 01-75PAA-2-2.1
S-3 Viking 01-S3AAA-3-4
T-45Goshawk A1-T45AB-SRM-100
V-22 Osprey OEM installation at factory
military technical order approvals
5
Skyflex®
aircraft sealant
aircraft applications service bulletin/manual/specification
Airbus A320 Wing leading edge access panels
Antennas
SB-A320-57-1052
SIL-A320-34-069
Airbus A300 Antennas
Main deck cargo loading system- floor panel sealing
SIL-A300-34-069
DASA specification 2250 MIC 0103 01
Airbus A330 Antennas
Horizontal stabilizer (spar)
Horizontal stabilizer (panels)- 200/300 series
Horizontal stabilizer (panels)- 500/600 series
Floor structure corrosion barrier
Floor structure corrosion barrier
Floor structure corrosion barrier
SIL-A330-34-069
ABS5311, ABS5311-01/ -02 & -03
F559-80032-200 & F551-82609-200
G551-80842-202 & G551-80843-202
ABS5631A25/ EADS number TBA
ABS5631A50/ EADS number 887 282 20
ABS5631A80/ EADS number 887 289 80
Airbus A340 Antennas
Horizontal stabilizer (spars)
Horizontal stabilizer (panels)- 200/300 series
Horizontal stabilizer (panels)- 500/600 series
Floor structure corrosion barrier
Floor structure corrosion barrier
Floor structure corrosion barrier
SIL-A340-34-069
ABS5311-01/ -02 & -03
F559-80032-200 & F551-82609-200
G551-80842-202 & G551-80843-202
ABS5631A25/ EADS number TBA
ABS5631A50/ EADS number 887 282 20
ABS5631A80/ EADS number 887 289 80
Airbus A380 Horizontal stabilizer fuel tank
Boeing 727 Sill plates entry way doors
Cargo floor
FEDEX EO 7-5321-7-3326
FEDEX SR27-51-001
Boeing 737 Passenger floors
Cargo floor
Cabin floor
Cargo tie downs
Engine struts
Landing lights
ECS access
Electrical panel access
Vertical stabilizer
Horizontal stabilizer
Gap cover panel
Reveal strip
737-SL-53-034-E
Production DWG 453A1600
Production DWG 452A1600
Production DWG 453A2600
Production DWG 311A-2539
Production DWG 116A1510
Production DWG 213A2330-1
Production DWG 214A0603
Boeing 747 Passenger floor panels 747-SL-53-090-E
Boeing 757 Passenger floor panels
Cargo floor panels
Wing leading edge
Tie downs
757-SL-53-018-E
SL-757-53-024 RC
AWA ER19-5760-01054-BR1 & UA 57-41-01
Production DWG 452A16
Boeing 767 Cargo floors
Engine nose cowls
767-SL-53-031-E
commercial approvals
6
aircraft applications service bulletin/manual/specification
Boeing 777 Passenger floorboards
Cargo floorboards
Tail strike indicator
Bombardier Dash 8 Radome
Center wing access panel
SB 84-57-07
Bombardier Challenger Floors
Bombardier CRJ Exterior panels
Floorboards
Dornier DO228 Floorboards
Dornier DO328 Floorboards DON 521 Specification
DON 878 Specification
Embraer ERJ 135 and 145 Windshields S.B. 145-56-0006
Lockheed L1011 Floorboards
Piaggio P280 Windshield
commercial approvals
7
Skyflex®
aircraft sealant
commonly used part numbers
New Part Number Old Part Number Description Example of Use
National Stock
Number
NATO Stock
Number
GSC-21-95035-010
GO-KS-0038,
GUA1038-1
36mm (1.4”) wide by
0.3mm (0.01”) thick
flat tape with adhesive,
color=grey
Access Panels 8030-01-463-6459 N/A
GSC-21-95070-011
GUA1002-1,
GO-AS-0002/1
7mm (0.28”) wide by
0.5mm (0.02”) thick
flat tape with adhesive,
color=grey
Compensation
tape used as
required to fill
gaps and crevices
to create a flat
sealing surface.
8030-01-367-7356 N/A
GSC-21-95150-011
GO-AU-0063/1,
GO-AU-0063,
GSC-21-80950-00
35mm (1.38”) wide by
2mm (0.08”) thick flat
tape with adhesive,
color=grey
Access Panels 8030-01-475-2005 N/A
GSC-21-95158-011 GUA1003-1
6mm (0.24”) wide by
2mm (0.08”) thick flat
tape with adhesive,
color=grey
Compensation
tape used as
required to fill
gaps and crevices
to create a flat
sealing surface.
8030-01-368-7207 9330-12-314-1145
GSC-21-95201-0111
GO-AS-0053,
GUA1001-1
41mm (1.61”) wide by
0.5mm (0.02”) wide
thick ribbed tape with
adhesive, adhesive
width= 25mm (1”),
color=grey
Access panels.
Seal faying
surfaces greater
than 33mm (1.3 “)
wide.
8030-01-367-7357 9390-12-350-5300
GSC-21-95201-011
GUA1001-2,
GO-AS-0053/1,
GSC-21-81181-00
41mm (1.61”) wide
by 0.5mm (0.02”)
thick ribbed tape with
adhesive, adhesive
width= 38mm (1.5”),
color=grey
Access panels for
sealing surfaces
28mm (1.1”) to
41mm(1.61”) wide
8030-01-475-1368 N/A
GSC-21-95241-011
GO-AS-0017,
GSC-21-81183-00,
GUA1017-1
28mm (1.1”) wide
by 0.5mm (0.02”)
thick ribbed tape with
adhesive, color=grey
Access panels and
windows. Seal
faying surfaces
less than 33mm
(1.3 “)wide.
8030-01-368-7208 8030-01-368-7208
GSC-21-95241-03
GSC-21-81048-00,
GUA1017
28mm (1.1”) wide by
0.5mm (0.02”) thick
ribbed tape without
adhesive, color=grey
Access Panels 8030-01-476-1042 N/A
GSC-21-95261-011
GSC-21-80598-00,
GSC-21-80730-00,
GSC-21-80767-00
28mm (1.1”) wide
by 1.5mm (0.06”)
thick ribbed tape with
adhesive, color=grey
Floorboards. Seal
faying surfaces
less than 33mm
(1.3 “) wide.
Thicker version of
GSC-21-95241-
011.
8030-01-454-7418 9390-12-350-5300
8
New Part Number Old Part Number Description Example of Use
National Stock
Number
NATO Stock
Number
GUA6003 GUA6003
9.1mm (0.36”) OD by
4.8mm (0.19”) ID washer
without adhesive
Washer to seal
10/32 screws
5310-01-463-6457 N/A
GSC-21-95811-022 GUA1057-1
25.4mm (1.0”) wide
by 1mm (0.04”) thick
flat tape with adhesive,
color=white
Floorboards-
Boeing Aircraft
8030-01-377-3084 8030-01-377-3084
GSC-21-95812-022 GUA1058-1
12.7mm (0.5”) wide
by 1mm (0.04”) thick
flat tape with adhesive,
color=white
Floorboards-
Boeing Aircraft
8030-01-381-1584 8030-01-381-1584
GSC-21-95813-022 GUA1059-1
50mm (2.0”) wide by
1mm (0.04”) thick flat
tape with adhesive, color
= white
Floorboards-
Boeing Aircraft
N/A N/A
GSC-21-98006-021
GSC-21-80542-00,
GUA1401-1
28mm (1.1”) wide ribbed
composite tape without
large bulb with adhesive,
color=white
Dry area
floorboards
8030-01-454-7419 N/A
GSC-21-98330-012 GUA4110-1
25.4mm(1.0”) wide by
0.25mm(0.01”) thick
predensified flat tape
with adhesive, color=grey
Predensified antichafe
tape
8030-01-476-2406 N/A
GSC-21-99206-01 GUA5000 Kit for S-3 aircraft
Complete kit for
the S-3
8030-01-389-1446 8030-01-389-1446
GSC-21-96426-04 N/A
F-15 wing fuel access
cover gasket, panel
number: 68A112174
F-15 Fuel 5330-01-512-5921 N/A
GSC-21-96427-04 N/A
F-15 wing fuel access
cover gasket, panel
number: 68A112176
F-15 Fuel 5330-01-512-3419 N/A
GSC-21-96526-04 N/A
F-16 370 gallon ground
cap die-cut gasket
F-16 external fuel
tank
GSC-21-96527-04 N/A
F-16 370 gallon aft filler
cap die-cut gasket
F-16 external fuel
tank
GSC-21-96528-04 N/A
F-16 370 gallon center
access die-cut gasket
F-16 external fuel
tank
GSC-21-96529-04 N/A
F-16 370 gallon filler diecut
gasket
F-16 external fuel
tank
commonly used part numbers
9
5330-01-532-1885 N/A
5330-01-532-2239 N/A
5330-01-532-3612 N/A
5330-01-532-2248 N/A
Skyflex®
aircraft sealant
New Part Number Old Part Number Description Example of Use
National Stock
Number
NATO Stock
Number
GSC-21-95207-011 GSC-21-80713-00
25mm (1.0”) wide
by 0.5mm (0.02”)
thick ribbed tape with
adhesive, no large bulb,
color=grey
Access panels 8030-01-438-4088 N/A
GSC-21-95202-011 GSC-21-80714-00
30mm (1.2”) wide
by 0.5mm (0.02”)
thick ribbed tape with
adhesive, color=grey
Access panels 8030-01-438-4067 N/A
GSC-21-95283-011x2 GSC-21-81397-0
35mm (1.4”) wide
by 0.5mm (0.02”)
thick ribbed tape with
adhesive, color=grey
Access panels 8030-01-467-6024 N/A
GSC-21-95477-04 N/A
0.5mm (0.02”) thick die
cut gasket for C-130 pitot
tube
C-130 pitot tube 5330-12-361-1001 N/A
GSC-21-95561-04 N/A
1mm (0.04”) thick die
cut gasket for C-130 pitot
tube
C-130 pitot tube 5330-12-361-1000 N/A
GUA6001 GUA6001
Washer for sealing
fasteners, ID 5mm (0.2”)
OD 9mm (0.34”)
Washers 5310-01-516-5202 N/A
GSC-21-95400-0805 GO-AS-0059/080
Washer for sealing
fasteners, ID 5mm (0.2”)
OD 8mm (0.3”) OD 8mm
(0.3”)
Washers 5310-01-463-6457 N/A
commonly used part numbers
10
installation techniques for
gore™ skyflex® tape
For complete installation instructions please refer to the Training
Manual for GORE™ SKYFLEX® Aircraft Sealant.
1. Start with a clean surface.
2. Apply tape to panel or structure.
3. Overlap corners.
4. Punch fastener holes in finished panel.
11
Skyflex®
aircraft sealant
gore™ skyflex® sealant tape
GORE™ SKYFLEX® Sealant offers customers the lightest weight,
non-curing, non-hazardous, form-in-place sealant technique. This
product can be maintained more efficiently than all other sealant
methods.
Typical Applications
Typical applications for GORE™ SKYFLEX® Sealant Tape are access
panels, floorboards, and windows.
Access Panels; Typical part number: GSC-21-95241-011
Floorboards; Typical part number: GSC-21-95261-011
Windows; Typical part numbers: GSC-21-95241-011 and GUA
6003
12
gore™ skyflex® sealant tape data sheet
GORE™SKYFLEX® Aircraft Sealant: Offers the customer, the lightest weight, non-curing, non-hazardous form-in-place sealant
technique. This product can be installed and maintained more efficiently than all
other sealant methods.
Material: Expanded Polytetrafluoroethylene (ePTFE).
Typical Characteristics: Highly conformable to surface irregularities.
Chemical Resistance: Inert to all common aircraft fluids.
Storage, without/with adhesive: Unlimited / Two years.
Color: White or Grey and may exhibit varied color within the product.
Typical Part Numbers: GSC-21-950XX-010 (ABS5631) and GSC-21-95264-021
GORE™ SKYFLEX® Aircraft Sealants are qualified to SAE Aerospace Material Specification 3255 dated December 1995 as credited by
the IMA Institute, Dresden, Germany.
Material Properties Europe USA
Test Method Value Test Method Value
Temperature range - -240°C/+260°C - -460°F/+500°F
Short term exposure to - +315°C - +600°F
Density ASTM D 792 0.4-0.9g/ccm ASTM D 792 0.4-0.9g/ccm
Low temperature flexibility AMS 3255 Para 4.5.7 Passed AMS 3255 Para 4.5.7 Passed
Tensile strength- uncompressed
ASTM F 152 method C >6.9 Mpa ASTM F 152 method C >1000 psi
Tensile strength- compressed ASTM F 152 method C >20.7 Mpa ASTM F 152 method C >3000 psi
Shrinkage- compressed ABR6-0127 Max 2% ABR6-0127 Max 2%
Salt fog (1500 hours) DIN 50021 No corrosion ASTM B117 No corrosion
Flammability ATS 1000.001 Passed FAR 25.853 (a) Passed
Smoke density/toxicity ATS 1000.001 Passed FAR 25.853 (d) Passed
13
Skyflex®
aircraft sealant
gore™ skyflex® environmental gaskets
GORE™ SKYFLEX® Environmental Gaskets are the most user friendly
and reusable environmental sealant for removable panels and
components.
Typical Applications
Typical applications for GORE™ SKYFLEX® Environmental Gaskets
are pitot tubes, sensors, cargo tie downs, and lights.
Pitot tubes; part number: GSC-21-95477-04
AAR-47 sensor gasket; part number: GSC-21-95560-04
Total air temp sensor; part number: GSC-21-95558-04
Cargo tie downs; part number: GSC-21-95424-04
MMW antenna detector part number: GSC-21-95559-04
Navigational light part number: GSC-21-95563-04
14
gore™ skyflex® environmental gaskets data sheet
GORE™ SKYFLEX® Environmental Gaskets: The most user friendly(1) and reusable environmental sealant for removable panels and
components
Material: Expanded Polytetrafluoroethylene (ePTFE).
Typical Characteristics: Highly conformable to surface irregularities.
Chemical Resistance: Inert to all common aircraft fluids.
Storage, without/with adhesive: Unlimited / Two years.
Color: White
Thickness: 0.5, 1.0, 1.5, 2.0 and 3.0 mm (Nominal)
Dimensions: Supplied in gasket form, engineered to customer requirements.
(1)
a) No mixing d) Less skill dependent on installation g) Less dependant on surface cleanliness
b) Easy to install, easy to remove e) No special storage requirements h) Does not require milled grooves
c) No cure time f) More tolerant to surface damage i) Accepts wider surface roughness
tolerances to seal
(2) Test methods per Airbus Non-Metallic Material Specification ABR6-0127 Issue 1 dated July 1993 unless otherwise stated.
(3) Values are unchanged after immersion in Skydrol A4 or Kerosene JP1.
GORE™ SKYFLEX® Aircraft Sealants are qualified to SAE Aerospace Material Specification 3255 dated December 1995 as credited by
the IMA Institute, Dresden, Germany.
Material Properties Europe USA
Test Method Value Test Method Value
Temperature range - -240°C/+260°C - -460°F/+500°F
Short term exposure to - +315°C - +600°F
Density (2) 0.6g/ccm (2) 0.4-0.9g/ccm
Tensile strength- uncompressed
(3)
(2) ≥15 Mpa (2) ≥1000 psi
Tensile strength- compressed (3) (2) ≥15 Mpa (2) ≥3000 psi
Elongation- compressed (2) ≥250% (2) ≥250%
Flammability ATS 1000.001 Passed FAR 25.853 (a) Passed
Smoke density/toxicity ATS 1000.001 Passed FAR 25.853 (d) Passed
15
Skyflex®
aircraft sealant
gore™ skyflex® fuel sealant
GORE™ SKYFLEX® Fuel Sealant is the most user friendly and reusable
environmental sealant for removable panels and components.
Typical Applications
GORE™ SKYFLEX® Fuel Sealant is available in two formats: die cut
gaskets and tape. Typical applications for GORE™ SKYFLEX® Fuel
Sealant are fuel access panels and external fuel tank panels. The
die cut fuel sealants shown below are used on the T-45 and the F-16,
external panels and external tank panels. Gaskets can be precut
to the customers required dimensions or gaskets can be cut in the
field from sheets of sealant. Tape sealant is recommended and can
be supplied for use on large panels.
Die Cut Gasket
OP Tape; Typical part number: GSC-21-96057-04 (1 in. wide by 0.032
in. thick, no adhesive)
Fuel resistant die cut gasket for the 370 Gallon Aft Filler Cap, part
number GSC-21-96527-04
16
gore™ skyflex® low temperature fuel sealant data sheet
GORE™ SKYFLEX® Fuel Sealant: The most user friendly (1) and reusable fuel sealant for removable panels and structures.
Material: Fuel repellent expanded Polytetrafluoroethylene (ePTFE).
Typical Characteristics: Highly conformable to surface irregularities.
Storage, without/with adhesive: Greater than 10 years/Two years.
Color: White
Description: Die cut gaskets up to 58 in (147cm) wide.
(1)
a) No mixing d) Less skill dependent on installation g) Less dependant on surface cleanliness
b) Easy to install, easy to remove e) No special storage requirements h) Does not require milled grooves
c) No cure time f) More tolerant to surface damage i) Accepts wider surface roughness
tolerances to seal
(2) W. L. Gore & Associates test method. Load to seal 0.5 bar (7.3 psi) positive air pressure in an aluminium alloy/perspex test box
secured with 6mm (0.240”) diameter fasteners at 43mm (1.70”) pitch.
(3) W. L. Gore & Associates test method. Ten repeat installations without leakage.
Material Properties Europe USA
Test Method Value Test Method Value
Temperature range - -65°C/+90°C - -85°F/+194°F
Short term exposure to - +120°C - +248°F
Density ASTM D 792 0.8-1.4g/ccm ASTM D 792 0.8-1.4g/ccm
Low temperature flexibility AMS 3255 Para 4.5.7 Passed AMS 3255 Para 4.5.7 Passed
Tensile strength- uncompressed ASTM F 152 method C >6.0 Mpa ASTM F 152 method C >870 psi
Tensile strength- compressed ASTM F 152 method C >13 Mpa ASTM F 152 method C >1885 psi
Shrinkage- compressed ABR6-0127 Max 2% ABR6-0127 Max 2%
Load to seal PM 0110/A (2) 3.4 N-m PM 0110/A (2) 30 in-lb.
Reusability PM 0110/B (3) Passed PM 0110/B (3) Passed
Flammability ATS 1000.001 Passed FAR 25.853 (a) Passed
Smoke density/toxicity ATS 1000.001 Passed FAR 25.853 (d) Passed
17
Skyflex®
aircraft sealant
gore™ skyflex® high temperature fuel sealant data sheet
GORE™ SKYFLEX® Fuel Sealant: The only easy to install interfay sealant for primary structural (1) and non-primary structural
(2) applications that facilitates flexibility (3) of installation in fuel applications.
Material: Fuel repellent expanded Polytetrafluoroethylene (ePTFE).
Typical Characteristics: Highly conformable to surface irregularities.
Storage, without/with adhesive: Greater than 10 years/Two years.
Color: White
Description: Die cut gaskets up to 18 in (50.8 cm) wide or tape 0.5 in to 5 in. (1.27 cm to 12.7 cm) wide
(1) For use in aircraft primary composite structures qualified to Type Certificate holder (OEM) requirements.
(2) For use in secondary and tertiary composite and metallic structures.
(3) Can be applied on or off-line using traditional manual or advanced automated manufacturing methods.
(a) W. L. Gore & Associates test method. Load to seal 0.5 bar (7.3 psi) positive air pressure in an aluminium alloy/perspex test box
secured with 6mm (0.240”) diameter fasteners at 43mm (1.70”) pitch.
(b) W. L. Gore & Associates test method. Ten repeat installations without leakage.
(c) Test results with similar material suggest a test pass but not confirmed. Fuel applications in cabin not expected.
Material Properties Europe USA
Test Method Value Test Method Value
Temperature range - -65°C/+180°C - -85°F/+356°F
Short term exposure to - +200°C - +392°F
Density ASTM D 792 1.0g/ccm ASTM D 792 1.0g/ccm
Low temperature flexibility AMS 3255 Para 4.5.7 Passed AMS 3255 Para 4.5.7 Passed
Tensile strength- uncompressed
ASTM F 152 method C >13 Mpa ASTM F 152 method C >1880 psi
Tensile strength- compressed ASTM F 152 method C >13 Mpa ASTM F 152 method C >1880 psi
Shrinkage- compressed ABR6-0127 Max 2% ABR6-0127 Max 2%
Load to seal PM 0110/A (a) 3.4 N-m PM 0110/A (a) 30 in-lb.
Reusability PM 0110/B (b) Passed PM 0110/B (b) Passed
Flammability ATS 1000.001 TBD (c) FAR 25.853 (a) TBD (c)
Smoke density/toxicity ATS 1000.001 TBD (c) FAR 25.853 (d) TBD (c)
18
GORE, SKYFLEX, and design are trademarks of W. L. Gore & Associates, Inc. AGS 03-2006
©2006 W. L. Gore & Associates, Inc.
Skyflex®
aircraft sealant product guide
W. L. Gore & Associates, Inc.
North America 800.445.GORE (4673)
International +1.302.292.5100
Europe +49.9144.6010
+44.1382.561511
gore.com