- 注册时间
- 2009-12-25
- 最后登录
- 2021-7-10
- 在线时间
- 3302 小时
- 阅读权限
- 200
- 积分
- 10
- 帖子
- 13416
- 精华
- 1
- UID
- 2036
|
Design Delegation Seminar
2009
Aircraft Certification Unit
Update
Contents
Aircraft Certification Unit - Update
Organisation
Staff
Professional Development and Training
Recent Unit Activities
International Agreements
Aircraft Certification Unit
Manager Geoff Connor
Airworthiness Certification David Gill
Design Certification Peter Gill
Continuing Airworthiness Jack Stanton
Avionics Specialist Ron Doggett
Airworthiness Engineers Beth Coughlan
Dave Selby
Continuing Airworthiness
Specialist
Owen Olls
Aircraft Certification Unit
Airworthiness Inspectors Steve Kern
(Nick Nicholson)
Aircraft Registrar Julia Reed
Flight Manual Administrator Mary Wallis
Test Pilot -VacantACU
Staff – October 2009
Mary and Julia
Chris Thomson
Design Engineer
Composite
Structures
Blades Technology
Development
Vestas Technology
R&D
Jeremy Cook
Professional Development
and Training
FAA Functions/Part 21 Approvals Course
Reliability and 1309 Safety Analysis
Boeing Structural Repairs
Helicopter Aerodynamics
Aircraft Performance
Lightning Protection
Oxygen System Design
FAA Powerplant Certification
CAA/Industry Work Exchange
FAA Cabin Certification & Flammability Workshops
Cabin Certification Training
Specific need identified to support industry
projects
Arranged for the CAA
Covered human tolerance and crash
dynamics, evacuation , cabin arrangement,
emergency equipment and future
airworthiness requirements
Four ACU engineers attended November
2008
Cabin Certification Training
Recent Unit Activities
Type Acceptance Visits
Recent STC Work
Performance Based Navigation
Biofuel Test Flight
Part 21 Special Category Re-write
Fletcher Fin Engineering Review
Agricultural Aircraft Safety Review
Type Acceptance Visits
The CAA has conducted validation visits as
part of the following type acceptances:
Agusta-Westland A119/AW139 – Agusta/EASA
Gulfstream G200 – Gulfstream/Israel CAA
Cessna 510 Mustang – Cessna/FAA
Dassault Falcon 7X – Dassault/EASA
Pratt & Whitney Canada PW615 – PWC/TC
Hawker 4000 – Hawker-Beechcraft/FAA
Recent STC Approvals
Transport Category Re-Configurations
Boeing 747-400 IFE/Complete reconfiguration
Boeing 767 IFE/Refurbishment
Boeing 737 IFE/Re-configuration
Airbus A320 IFE/Re-configuration
Boeing 777 Premium Economy Expansion
Agricultural Spray Systems
Spray/Cargo Systems for Robinson R22/R44
Current STC Project
Re-engine BK117
Re-engine BK117 with
LTS-850 engine
- Supported by
Honeywell
Performance Based Navigation
ICAO Asia Pacific PBN Task Force
(ICAO Regional Office, Bangkok)
Implementing PBN in the APAC region
ICAO PBN Study Group
(ICAO Air Navigation Bureau, Montreal)
Developing PBN specifications and the ICAO PBN
Manual
Air NZ 747 Biofuel Test Flight
Part 21 Special Category Re-write
Part 21 is being amended to expand the Special
Category to provide for specific sub-categories:
LSA (Light Sport Aircraft)
Primary Category (FAR §21.24)
Amateur-built
Limited (also known as Production Non-Certified)
Experimental (Research & Development)
Exhibition
Fletcher Fin Engineering Review
Following a fatal accident
To establish the airworthiness of the fin from a
damage tolerance, structural design and fatigue
strength perspective.
Established design features for new replacement fin
Copy of the report available on the CAA website
Agricultural Aircraft Safety Review
Detailed Safety Review on Agricultural
Aircraft Operations
Major Findings:
Step change in reported defects since the
introduction of Part 137 in October 1994
(which introduced the CAM8 increased
gross weight provisions)
Another step increase occurred around
2001, which coincided with the widespread
introduction of turbine conversions of the
FU24-950 Series aircraft
International Agreements
FAA and EASA Update
Summary of the Current Agreement
Recent Meetings/Activity
Extensions Requested to Current Agreements
Current Agreement - FAA
TCs for FAR 23 aircraft of NZ State of Design
STCs for FAR 23 aircraft of NZ State of Design
STCs for FAR 25 aircraft of US State of Design for
cabin re-configurations, less electrical, avionic and
IFE compliance determinations.
Acceptance of repairs to FAR 25 aircraft of US
State of Design
Recent Activity/Meetings - FAA
FAA visit to CAA - March 2009
Presentations from the CAA and Industry Visit.
Bilateral Partners Meeting, Sydney - April 2009
Part 23 Program Managers Meeting, Kansas
- May 2009
Extensions Requested to Current
Agreements - FAA
STC’s for FAR 23 and FAR 25 aircraft of US and
non-US State of Design
STC’s for FAR 27 and FAR 29 rotorcraft of US
and non-US State of Design
- Projects suitable for the FAA to review were identified.
- Formal letter requesting extension to the current
agreement sent to the FAA 9 April 2009.
- FAA Currently prioritizing their workload
Current Arrangement - EASA
November 2007 signed a Working Arrangement
Provides for EASA to accept two NZ Aircraft
types. (Alpha R2000 Series and PAC 750XL)
Recent Activity/Meetings - EASA
EASA – Visited CAA April 2008
Discussion on extension of the scope to the
Working Arrangement
Presentations from the CAA and Industry Visits
Visit Report produced with a list of action items on
EASA
Extensions Requested to Current
Working Arrangement - EASA
Acceptance of NZ manufactured parts, components
and appliances for installation on Part 23 aircraft.
The acceptance of repairs, modifications and STCs
on Part 23 aircraft and repairs to Part 25 aircraft
and STCs covering changes in the passenger cabin
and crew rest compartments on Part 25 aircraft.
- Projects suitable for EASA to review were identified.
- No response to the open action items.
Latest Activity - EASA
EASA has proposed the inclusion of an
Aviation Safety Arrangement as an addition to the
NZ/Europe Air Services Agreement
EU has a level of commitment to this path
Widen the scope beyond the existing limited
Working Arrangement
CAA is working with the MOT on this proposal |
|